|
| |
 |
| Click Picture for Price and Availability |
| We now offer FACTORY EXACT Date Coded Glass for 1964 1/2 thru 1970 Ford vehicles. We have done the research to guarantee that you get the correct logos and print styles, according to your vehicles build date and manufacturing plant. |
|
| |
 |
| $7.00 |
| 19641/2 thru 1965 decals were located on the flat spot, next to the inlet side, of the water pump. 1966 and 1967 decals were located on the coil bracket facing the front of the engine. 1968 – 1970 were located on the front area of drivers side valve cover. Boss 429 cars were usually located on the antiback-fire valve, or on the driver’s side of the engine block just below the head. Big block cars were located on the passenger side of the engine, on the head, just below the valve cover... |
|
| |
 |
| $16.00 |
| This is the decal that is curved (approx. 12” in length) and is located on the top side of the chrome/painted air cleaner lid. This decal has the correct color and lamination, just like the originals! |
|
| |
 |
| $6.00 |
| Decal is located on the side of the air cleaner housing. |
|
| |
 |
| $5.00 |
| Decal is located on the driver side area of the air cleaner housing. |
|
| |
 |
| $5.00 |
| Decal is located on the front of the air cleaner housing. |
|
| |
 |
| $6.00 |
| Decal is located on the top, flat area of the oil breather cap. |
|
| |
 |
| $12.00 |
| Decal is located on the radiator cap top on HiPo Shelby Mustangs. |
|
| |
 |
| $11.00 set |
| Decals are placed according to which facility assembled the vehicle. Dearborn cars were located on the front of driver side valve cover and rear of passenger side valve cover. Metuchen cars were located on the front of both driver side and passenger side valve covers. Set of two. |
|
| |
 |
| $6.00 |
| Decal is located on top center section of the fan shroud. |
|
| |
 |
| $7.00 |
Decal is located on the top of master cylinder reservoir lid/cover.
Note: Some early 1969 vehicles had this decal.
|
|
| |
 |
| $5.00 |
| Decal is located on gas filter that screws into the front carburetor bowl. |
|
| |
 |
| $8.00 |
| Decal is located in various locations depending on which engine was installed. Examples would include the top firewall area on the passenger side, the driver side shock tower, the passenger side shock tower, or the driver side inner fender well next to the washer bottle. 1971 model labels were located on the top of the radiator core support. |
|
| |
 |
| Unstamped $10.00 / Stamped $11.00 |
| Located on fire wall, drivers side shock tower, and drivers side door jam. Set of 5 tags; includes F, T, B, P, and E. Dearborn assembled cars only! It is optional to have these tags stamped with the names of the original assembly line inspectors. |
|
| |
 |
| $12.00 |
| Decal is affixed to six port plastic vacuum tree that is located in the middle of the firewall, just below the horizontal body seam. |
|
| |
 |
| $6.00 |
| Decal will be located in various locations of the engine compartment, depending on engine size and which plant assembled the vehicle. Boss 429 and Metuchen Boss 302 cars were usually located on the air cleaner snorkel. Dearborn & San Jose Boss 302 cars were usually located on the front top or center side area of the drivers side valve cover. |
|
| |
 |
| Unstamped $5.00 / Stamped $7.00 |
| Decal is located on the fender well, near battery. If stamped, owner must provide correct build date of vehicle. |
|
| |
 |
| $12.00 |
| Decal is located on the top center section of the battery between the positive and negative posts. (These decals were not used on original autolite batteries from 19641/2 thru 1966.) |
|
| |
 |
| $7.00 |
| Tags were located on either the #1 or #4 plug wire (passenger side) and the #8 wire (driver side). They were placed on the plug wires about one half inch away from the wire boot that plugs into the distributor cap. They identify the right (passenger) and left (driver) spark plug wire assemblies. |
|
| |
 |
| $16.00 Set of 8 |
| These decals are wrapped around the spark plug wires on Boss 429 vehicles. |
|
| |
 |
| $6.00 |
| Decal is located on the flat area of the aluminum distributor shaft facing the front of the vehicle. |
|
| |
 |
| Set of 4 $16.00 / Set of 2 $6.00 |
| These small identification tags are located on the battery and distributor lead wires that connect to the positive and negative posts of the coil. |
|
| |
 |
| $5.00 |
| Tag is located on the small 5 inch blue colored solenoid wire that is located on the driver's side of the carburetor. The tag is placed in the middle area of the wire. |
|
| |
 |
| $6.00 |
| Cable routes from starter solenoid to starter terminal. Tag is located approximately 11 inches down the wire from the point that it connects to the solenoid. Note: 19641/2 to 1967 did not have a tag. The part numbers were printed directly on the wire. |
|
| |
 |
| $6.00 |
| Tag is located on the ignition coil wire, approx. 1 inch down from the distributor and insulator bolt. |
|
| |
 |
| $6.00 |
| Wire that joins horns together for cars with oil cooler-drag pac option. Tag is located in the middle of the connecting horn wire. |
|
| |
 |
| $6.00 |
| These tags are located on the main wiring harness approximately one inch from the harness engineering identification tag. The tags had either a three digit or four digit inspector number accompanied with the assembly date of the wiring harness. This date usually preceded the build date of the car by approximately two to three months. All were used in various areas and are correct for most vehicle applications. Owner may choose from the examples given. |
|
| |
 |
| $7.00 |
| This wire comes out of the driver side of the firewall and routes down to the shifter mechanism. The tag is located between the pigtail connection and the J-hook on the firewall. |
|
| |
 |
| $7.00 |
| Wiring harness routes to various terminals on the back of the alternator. Tag is located approximately 7 inches down the loom from where the wires connect to the back of the alternator. |
|
| |
 |
| $7.00 |
| Wiring harness is routed form the driver's side firewall, around the shock tower, and to the front of the vehicle. Tag is located approximately 3 inches down the harness where it exits the firewall. |
|
| |
 |
| $7.00 |
| Wiring harness is on left side of engine and is routed between the valve cover and intake manifold. Tag is approximately 6 inches away from where the wires connect with the coil terminals. It is placed on the harness, around the #5 port of the intake manifold. |
|
| |
 |
| $6.00 |
| Tags are randomly located on secondary wiring looms (off the main harnesses), throughout the car. There are no definitive locations for these particular tags. They were placed on the loom by the vendor or harness inspector. There are two options. First is a vendor arrow symbol. The second is a three digit inspector code. We offer many different inspector numbers that were taken from original examples. |
|
| |
 |
| $9.00 set |
| Tags are for drag pac cars ONLY with manual transmission, and 3.90 to 1 or 4.30 to 1 series gears. Tag attaches anywhere in the middle section of the cable. Note: the plain yellow tag is located about two inches away from the main cable tag. Set of two. |
|
| |
 |
| $12.00 Set |
| This harness is located inside the car and routes from the fuse box, along the top of the dash reinforcement metal under the dash pad. The tags were usually found in two different areas. It was located 2" to 3" from where the harness exits the fuse box, or on the loom in front of the driver. A solid colored tag also accompanied this tag, and was located approximately an inch or two away. We offer red, blue, tan and green solid tags with these to complete the set. |
|
| |
 |
| $7.00 |
| Tag is located on wire that goes to the convertible top switch. |
|
| |
 |
| $6.00 |
| This tag is located on clock feed wire. |
|
| |
 |
| $15.00 |
| Tags are located on wiring harness that runs between the fender and front door jams. Deluxe interior and door speaker equipped cars only! Set of 4; includes two tags with engineering numbers and two tags which are colored without markings. |
|
| |
 |
| $11.00 set |
| Tags are located approximately four inches behind each of the front head light connector plugs. Set of two. |
|
| |
 |
| $10.00 / $14.00 set |
| Tags are located on the wire between the parking lamp socket and the pigtail connector. Set of two. |
|
| |
 |
| $7.00 set |
| Decals are affixed to the lower area of the side marker light brackets, located on the inner front fender. Set of two, left and right. |
|
| |
 |
| $7.00 |
| Tag is located on the wire that connects to the fog lamp switch. |
|
| |
 |
| $7.00 |
| Tag is located at the end of the fog lamp wiring harness on the passenger side of the vehicle. A date coded tag is positioned approximately one inch away from this one. Dates may vary; vehicle owner must provide build date of car. (See date coded tag section.) |
|
| |
 |
| $7.00 |
| Tag is located on the main tail light wiring harness that is routed through the trunk. It is affixed approximately one inch from the furthest point on the harness sheathing, underneath the passenger rear tail light. A date coded inspector tag is located approximately one inch away from this one. Dates may vary; vehicle owner must provide build date of car. (See date coded tag section.) |
|
| |
 |
| $8.00 |
| Tag is located on the main tail light wiring harness that is routed through the trunk. It is affixed approximately one inch from the furthest point on the harness sheathing, underneath the passenger rear tail light. A date coded inspector tag is located approximately one inch away from this one. Dates may vary; vehicle owner must provide build date of car. (See date coded tag section.) |
|
| |
 |
| $6.00 |
| Tag is located on the wiring pigtail harness (3 bulb connectors) that plugs into the main tail light wiring assembly. |
|
| |
 |
| $6.00 |
| Tag is located on the wire that connects to the brake light switch. |
|
| |
 |
| $7.00 set |
| Decals affix to the top side of the plastic side marker light housings located inside the trunk. Set of two, left and right. |
|
| |
 |
| $7.00 |
| Tag is located on wiring harness that runs through Shelby console. |
|
| |
 |
| $6.00 |
| Decal is affixed to the center area of the header panel or driver side pull latch on a convertible optioned vehicle. |
|
| |
 |
| $8.00 |
| Decal is located on the back side of the driver and passenger visors. |
|
| |
 |
| $18.00 pr. |
| These paper floor mats were supplied by the dealer and were usually in the car when delivered to the customer. |
|
| |
 |
| $9.00 |
| This warranty statement was included with the vehicle paperwork from the factory. |
|
| |
 |
| $8.00 |
| Sleeve slides over the driver side visor. |
|
| |
 |
| $7.00 |
| Decal is located on the instrument panel, above the choke pull lever. |
|
| |
 |
| $6.00 |
| Decal is affixed to the inside windshield in various locations. |
|
| |
 |
| $6.00 |
| Decal is affixed to the inside windshield in various locations. |
|
| |
 |
| $11.00 |
| This Kar Kraft windshield card was used to numerically identify each car as it was converted on their assembly line. Card is taped to the inside windshield on the passenger side. (Vehicle owner MUST provide Nascar KK number when ordering) |
|
| |
 |
| Unstamped $6.00 / Stamped $7.00 |
| Decal is located in the upper left hand corner of the inside windshield or inside the lower corner of driver side window. These were stamped by inspectors as the cars moved down the assembly line. |
|
| |
 |
| $15.00 |
| Decal affixes to the stamped aluminum VIN plate riveted in the lower corners of the windshield/dash area. (1968 passenger side; 1969 driver side.) |
|
| |
 |
| $6.00 |
| Decal is located on driver side window, near the new car price sticker. It lists additional options that were installed at the dealership. |
|
| |
 |
| $5.00 / $6.00* |
| This decal is located on the inner driver side window, on the bottom front corner. The Boss 429 decal is located on the inside upper area of the windshield. Please specify which plant assembled your vehicle. |
|
| |
 |
| $24.00 |
| Decal is located on the driver's door jam area just above the VIN data plate. It identifies the sequence production number of the car. |
|
| |
 |
| $7.00 |
| Decal is located on the passenger door jam area for 1970 cars just above the latch mechanism and on the driver door jam area for 1969 cars. Shelby decals were located on the glove box door. |
|
| |
 |
| $8.00 |
| Decal is located in the passenger door jam area for the 1970 cars above the latch mechanism and in the driver door jam for 1969 cars. |
|
| |
 |
| $8.00 |
| Decal is located in the back license plate area. |
|
| |
 |
| $6.00 |
| Decal is located in the upper left or center recessed areas of the underside of the trunk deck lid. If the car is equipped with a space saver tire, the tag is located in the upper center recessed area. If the car has a full size spare then the tag is located in the upper left recessed area. |
|
| |
 |
| $20.00 / $10.00 |
This sleeve is located on the Inflator Bottle that is located under the space saver spare tire. Quadrant #3, on the Space Saver Instructions Decal specifically refers to this sleeve and its purpose.
Note: This sleeve is designed to fit the 1968 -1970 Inflator Bottles. The 1971 and later bottles are slightly larger.
|
|
| |
 |
| $11.00 |
| Decal is located on the underside of the trunk deck lid. On Dearborn and San Jose cars they were located on the left side in the upper middle area. On Metuchen cars, they were located on the left side, in the lower area. |
|
| |
 |
| $6.00 |
Decal is located on the tread area of the space saver tire.
Note: This decal did not always come on a space saver from the factory. It's a delivery label that has been found on some space saver tires and or service replacement examples.
|
|
| |
 |
| $8.00 |
| In 1965 - 1968 this decal was located on the underside of the trunk deck lid (center). In 1969 -1970 Dearborn cars, it was located on the right side in the upper middle area. In 1969 - 1970 Metuchen cars, it was located on the right side, but in the lower area. |
|
| |
 |
| $5.00 |
| Small decal affixes to the scissor jack located in the trunk. |
|
| |
 |
| $7.00 |
| Tag attaches on the wiring harness located under the trunk mat. |
|
| |
 |
| $5.00 |
| Tag attaches immediately where the metal fuel outlet tube exits the sending unit. |
|
| |
 |
| * Click on picture for pricing * |
This decal is located on the driver's door of the vehicle. Exact placement will depend on make and style of vehicle.
Note: Vehicle component information and VIN number must be provided in order to reproduce these decals. Please request any additional instructions prior to ordering this item.
|
|
| |
 |
| * Click on picture for pricing * |
| E.C.S. Automotive Concepts also offers a complete Decal/Tag kit for those who are performing a complete restoration, or would like to upgrade their vehicle to a more original and correct level. Click on the picture for all the kits that are available for various model cars and a breakdown of what is offered. |